Webbing

Ultra-Durable and Strong

Trusted Worldwide

Field Replaceable

TRUBLUE iQ Replacement Webbing
As low as $246.00
The TRUBLUE iQ Auto Belay is fitted with improved, wider webbing that can be replaced in the field by the owner using the Replacement Webbing.
If selecting TRU-CLIP Connector, additional Key Links may be needed for optimal coverage.
Note: Not for use in TRUBLUE 2 or TRUBLUE XL auto belays.
Learn More
TRUBLUE Speed Replacement Webbing
As low as $277.00
This webbing set is designed to be replaced in the field to keep your TRUBLUE Speed Auto Belay webbing free from nicks, cuts, snags or sun damage.
If selecting TRU-CLIP Connector, additional Key Links may be needed for optimal coverage.
Learn More
TRUBLUE XL Replacement Webbing
As low as $329.00
The TRUBLUE XL is fitted with a webbing that can be replaced in the field by the owner using the Replacement Webbing. Worn or damaged webbing should be replaced immediately. Damage includes, but is not limited to, excess wear, fluffing, sun bleaching, cuts, knicks, loose stitching, or burns.
Replacement webbing comes with a choice of a Steel or Aluminum carabiner.
The frequency of webbing replacement depends on usage. Please refer to the TRUBLUE Auto Belay Operator’s Manual for more information.
Note: For use with TRUBLUE XL only.
Learn More
TRUBLUE Replacement Webbing
As low as $236.00
The TRUBLUE Auto Belay is fitted with a webbing that can be replaced in the field by the owner using the Replacement Webbing.
If selecting TRU-CLIP Connector, additional Key Links may be needed for optimal coverage.
Learn More

Common Questions

Looking for a little extra help?

Check our full FAQs OR talk to an expert

What length of webbing is right for me?

Webbing or Ripcord length all comes down to the size of your climbing wall or adventure structure! In general, tall elements need the XL model (20m webbing for TRUBLUEs), while short-to-mid-size elements need the base model (12.5m webbing for TRUBLUEs). Refer to our selection guides for more details on choosing the right model and webbing length for your structure.

It’s important to note that each device has a maximum mounting height and minimum mounting height. To ensure safe operation, devices must be mounted within the specified mounting height range. The mounting height for all Head Rush climb and jump devices is measured from the nozzle of the device to the ground. Contact us for help!

What webbing connector on my webbing is right for me?

Each connector is designed for your specific goal and facility type.

Every connector except for the Open Loop option has an integrated swivel to ensure optimal retraction and extend the lifespan of the webbing.

Steel Carabiner
Our standard carabiner is durable and long-lasting with triple-action auto-locking protection. Ideal for indoor climbing walls, like climbing gyms and rec centers.

TRU-LOCK Aluminum Carabiner
Triple-action auto-locking protection that is lighter than steel and corrosion resistant for outdoor use. Includes a full-strength secondary attachment point for optional backup. Recommended for climbing gyms, rec centers, camps and competitions.

TRU-CLIP Connector
The sequenced clipping system prevents clipping errors and minimizes required staff for oversight of large groups. Perfect for fun climbs, camps, and anywhere that uses rental harnesses.

Adventure Swivel
A versatile solution for unique operations that require custom connectors. Can hold up to 3 carabiners at a time. Recommended for adventure parks.

Open Loop
A full-strength attachment point that’s designed to accommodate approved sequenced connectors. Recommended for fun climbs and family entertainment centers.

When should I replace my webbing?

Any webbing that appears damaged or shows signs of wear should be replaced immediately. Damage may include but is not limited to excess wear (fluffing), sun bleaching, cuts or knicks, loose stitching or burns. Webbing on all our devices can be replaced during annual service, or by a qualified operator in the field.

The frequency of replacement will vary depending on usage. Please refer to the

Does webbing get replaced during annual service?

If you’re enrolled in our No Delay Belay service subscription for TRUBLUE Auto Belays, one benefit of the program is that your freshly serviced device will arrive with a new webbing installed!

For zip or jump devices, or if you choose to send in your auto belay for annual service, we’ll inspect your webbing for wear and tear during service to see if it needs to be replaced before sending it back to you. If the webbing needs replacing, and you didn’t select to pre-pay for a replacement webbing, there will be an additional charge paid at the time of service.

Pro tip for standard annual service appointments: to speed up the process always select to pre-pay for replacement webbing or allow us to automatically charge your card if it's necessary to replace the webbing due to wear.

The Height of Safety since 2008

Reliable Technology

Trusted Worldwide

Built-In Durability

Common Questions

Looking for a little extra help?

Check our full FAQs OR talk to an expert

What makes TRUBLUE Auto Belays better than the rest?

TRUBLUE Auto Belays use patented magnetic braking technology, also found in high-speed trains and roller coasters. This provides friction-free, reliable braking that eliminates brake pads and reduces wear and maintenance.

Each device undergoes extensive third-party testing by an ISO 17025 accredited lab, ensuring top-tier safety and performance. This results in an extended device lifespan and higher cycle capacity, making TRUBLUE the safest, most durable auto belay on the market.

Why does my TRUBLUE Auto Belay need to be serviced?

TRUBLUE Auto Belays are life-safety devices, and annual service inspections are crucial to maintaining safety standards and ensuring your device warranty remains valid. Lives are quite literally on the line!

Each service includes a comprehensive 62-point inspection, repairs or replacements of worn parts (including webbing), cleaning, and testing across a full range of weights to ensure optimal performance.

How often do I need to service my TRUBLUE Auto Belay?

TRUBLUE Auto Belays require service inspections 15 months after the manufacturing date and every 12 months thereafter to ensure a high standard of performance and safety.

We offer two service options: a standard annual service appointment, where you send in your device for inspection and get the same one back, or contact us for our No Delay Belay program, which provides a quick swap for a recertified fleet device with zero downtime, as well as other benefits.

What wall height is a TRUBLUE Auto Belay compatible with?

TRUBLUE iQ with 12.5m (41ft) webbing:

Maximum wall height of 12.5 m (41 ft)
Minimum wall height of 4.5 m (14.8 ft)

TRUBLUE iQ with 20m (65.6ft) webbing:

Maximum wall height of 20 m (65.6ft)
Minimum wall height of 12 m (39.4 ft)

View the TRUBLUE selection guide for additional assistance.